Bs1 Base/Mattress

Mattress-core (no: metal-springs)

Mattress-core must fully support a body-weight of 125kg. Warranty 7 years.

Hypo-allergenic, supportive, distribute body-weight, relieving pressure points, moderate
temperature, fungi-resisting, Chlorofluorocarbons free.

Base/Mattress-size/ (measure in meters)

Inside frame: width 1.06m, length 2.06m (fit mattress width 1.05m, length 2.05m). The
Outside frame should be of the floor 0.09m. This enables air circulation & cleaning (under
bed). Inside frame has 7 loose wood slats: width 1.06m, thickness 0.03m, there are 0.03m
gaps between slats (to increase air circulation of mattress), distance between floor & slats is
0.1m. The empty space between floor & slats is for air circulation & cleaning (not storage) &
should stay empty./ Mattress-size: width 1.05m, length 2.05m. Note ! There is only 1 sized
single-bed Base/mattress. Couples have 2 single-bed Base/mattresses.

Mattress-cover (there are 2: protector & outer)

Both covers are machine washable. Protector-cover
has a zip to enable filling to be washed, supplemented,
replenished. Protector-cover has pure silver (no alloy)
particles woven in giving anti-bacterial, anti-microbial
& anti-static properties & containing odors. Outer
cover is a cotton fitted sheet covering Protector-cover
& Mattress-core. Elastic strips keep it in place.

Note! When visiting (holidaying) bring your own
mattress covers (both).

Mattress-clean

Every 7 years mattress is replaced with new 1.
Replaced mattress is destroyed.

Every 7 weeks both covers should be washed in bio-
degradable 60°C water. (Warning! No dry-cleaning)

Drying should be in natural flowing air/breeze (no
dryer) & shade (no direct sunlight).

Warnings!
Never reuse or pass on pre-owned mattress. Never
share a mattress cover. Sharing risks the spread of
infectious diseases.

Base/Mattress-prerequisites:

Base must give firm structural mattress support & provide air-flow to the mattress. / A
mattress needs to maintain the natural curves of the spine in any sleeping position.

Base must be sturdy & noiseless. It must not give of electro magnetic waves (e.g. motor-
powered). Must be horizontal level (no tilting parts). Base has 7 removable solid wood-
slats (dried & aged) the width of the bed. Base needs to be Dust-mite free. It should fully
support weight of 150kg & have a Warranty of 14 years. / For restful re-vitalizing sleep the
weary body has to lie down a mattress is best. The pressure on the supported areas of your
body should be minimal. The micro-climate of the mattress needs to moderate
its temperature.